Industry News- Nantong Samson Precision Industry Co., Ltd.

Single Ferrule Fittings: Pressure Limits, Easy Assembly, and When to Specify Them

Direct Answer A single ferrule fitting is a three-piece compression fitting — nut, body, and one ferrule — where that single ferrule handles both sealing and gripping the tube at...

Jul.29.2026

What Is a Ferrule Fitting? Guide to Stainless Steel Double Ferrule Fittings in Chemical Processing

A ferrule fitting is a compression fitting that uses one or two metal rings (ferrules) to seal and grip tubing when a nut is tightened onto the fitting body — no welding or solder...

Jul.22.2026

What Are Pipe Clamps Used For? The Ultimate Guide to Pipe Clamps

Quick answer: pipe clamps are used to secure, support, and align pipes so they stay in position against gravity, vibration, and pressure while still allowing for the small amount ...

Jul.15.2026

The Ultimate Guide to VCR Fittings: High-Purity Engineering and Leak-Tight Seals

A VCR fitting is a metal gasket face seal connector that creates a leak-tight, metal-to-metal joint by compressing a thin metal gasket between two precision-machined gland faces. ...

Jul.08.2026

What Is a Ball Valve Used For? A Complete Guide to Ball Valves, From Casting Valves to Instrument & Hydraulic Variants

A ball valve is used to start, stop, or isolate the flow of a liquid or gas by rotating a hollow, perforated ball 90 degrees within the valve body — when the bore aligns with the ...

Jul.01.2026

The Complete Guide to High Pressure Valves: Materials, Classes, and Failure Prevention

High pressure valves are valves engineered to safely control fluid or gas flow at pressures typically above 100 bar (1,450 psi), with specialized designs rated up to 15,000 psi (1...

Jun.24.2026

What Are the Different Types of Pipe Fittings? A Complete Guide

Pipe fittings are components used to connect, redirect, branch, or terminate sections of pipe in a piping system. There are more than a dozen distinct types, each engineered for a...

Jun.17.2026

What Is a Valve Manifold? The Engineer’s Guide to Compact Valve Manifolds

A valve manifold is a single machined or fabricated block that integrates multiple valves, flow paths, and ports into one compact assembly, replacing what would otherwise be a net...

Jun.10.2026

What Is a Check Valve Used For? Applications & Function

A check valve is used to allow fluid or gas to flow in only one direction while automatically preventing reverse flow—without requiring any manual operation or external control si...

Jun.03.2026

How Does a Ball Valve Work? Types, Uses & Selection Guide

A ball valve works by rotating a hollow, perforated sphere — called a ball — inside a valve body to control the flow of fluid. When the bore through the ball aligns with the pipe,...

May.27.2026

What Is Seamless Pipe: Tubing Types, Grades & Manufacturers

A seamless pipe is a hollow cylindrical tube manufactured without a welded seam — formed instead by extruding or piercing a solid steel billet through a mandrel, producing a singl...

May.20.2026

VCR Fittings: A Complete Guide to Design, Installation, and Selection

In the context of fluid and gas systems, VCR stands for Vacuum Coupling Radiation — a proprietary face-seal fitting design originally developed by Cajon Company (now part of Swage...

May.13.2026

Language

+86-13917221881

Submit